Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Skip to product information
1/2
cryo dry 25 °
¥858,000
（税込）
¥780,000 （税抜）
Suitable for making sections with a thickness of 25-200 nm.
The blade protrudes from the housing, and the blade cuts well into the sample.
Other than ultrasonic type, this product reduces the compression when you cut out the thin sections.
SEM images of the materials cut with 25
・ Cross-section BSE image of aluminum foil for electrolytic capacitors (thickness 0.1 mm, etched)
Left side of the photo (approximately 2/3: from the surface); cut using a diamond knife with a blade angle of 25 °.Right side of the photo (1/3 remaining); Use a diamond knife with a blade angle of 45 °.
The part cut with a blade with an angle of 25 ° gives a clear image of the cross section of the subgrain structure, but the part cut with a blade with an angle of 45 ° is unclear.
The effect of compression between the differences in the angles of the two blades is clear.
* You can see other cross-section SEM images using cryo dry 25 °. Click here
あなたにオススメの商品
Invalid password
Enter